http://www.gsm4bd.com/ en Thu, 09 Sep 2010 19:51:49 GMT vBulletin 60 http://www.gsm4bd.com/images/Styles/Blackend/misc/rss.png http://www.gsm4bd.com/ http://www.gsm4bd.com/showthread.php?89258-FractalizeR-s-Shield-Suite-Smartcard-protection-applets-sources-amp-services&goto=newpost Thu, 09 Sep 2010 14:33:05 GMT FractalizeR's Shield Suite:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~

The Shield Suite is a softwares & sources pack for serious GSM developers, that need to quickly put a new GSM product to the market without having to learn for a long time how to protect the software with smartcards.

The pack includes:
- Protection applet with sources (*.java). Applet is modular and allows to separately modify secure session protocol and applet commands. Data communication works in this way: secured session is initiated and then all commands going to/from applet are encrypted and digitally signed.
- Eclipse development environment, presetup to develop applets
- Application (with Delphi sources) to test applet protocol stability under stress load
- Delphi source (class) to work with applet using secure protocol
- The software to do mass card programming (several cards can be programmed at the same time, multithreaded). Binary version without sources, customized for customer demands (only small additions/changes are fulfilled for free).
- FractalizeR's SmartCard API (Delphi class library) to send commands to card and receive replies. With sources.

Applet features:
- Initiate / terminate secure session
- Easy customization, commented source code
- Card blocking mechanism (if someone makes any attempt to communicate card and sends malformed data stream to card - card stops responding to commands until next update)
- Several commands (like NOP, hello, encrypt, md5 etc) to provide an example on how to extend applet and tune it to your needs.
- Average simple command execution time inside secure session - 150-200ms on Gemalto TOP cards.
- Permanent serial number & limited data storage (stored inside permanent applet, that is written to card only once).

Softwares and applet can be tested on cards provided by customer to exclude not supported features. Small modifications - free. Consulations - free.

Conditions: No passing or reselling provided materials. No passing or reselling solutions, based on provided materials. Per-team licensing (the license to use the sources is granted to purchasing team and all their products. Any new team should purchase another license). Time needed to prepare sources - 2-4 weeks starting from receiving card samples the sources are targeted by.

Warranties: Unique secure session protocol with a possibility to easily increase protection complexity. Algorithms can be changed by customer in order to be unknown to the outsiders and FractalizeR himself. Although no "unhackable" warranty is provided (spit on anyone, who even dares to guarantee things like this), but the solution is strong enough.

Skills needed: basic Java knowledge to be able to modify applet and add command handling you need (consultations provided). Delphi knowledge to integrate protection sources.

The price - $2900. The cost sometimes can be also paid by some existing popular GSM products in quantities, accepted by the author

Additional vital products and discounts:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~

- Emeralda client-server suite - the software suite to enable remote smartcard update with sources. Price if purchased separately: $2500. Price if purchased with the Shield Suite: $1500. It's everything, that is needed to kickstart or relaunch ANY GSM project in no time.
- Multithreaded smartcard programmer with full sources (allows to programm many cards at the same time. Mass-production tool). Price if purchased separately: $1500. Price if purchased with Emeralda 1.5: $300. ]]> facebook http://www.gsm4bd.com/showthread.php?89258-FractalizeR-s-Shield-Suite-Smartcard-protection-applets-sources-amp-services http://www.gsm4bd.com/showthread.php?89257-Emeralda-Smart-Card-Upgrade-Client-Server-Suite-1.5-from-FractalizeR-available&goto=newpost Thu, 09 Sep 2010 14:31:49 GMT Hello.

It's a bit early to publish may be since the project is incomplete for now, but I can see a big buzz around migrating to new cards these days. So, I'm just announcing, that Emeralda 1.5 is almost complete.

New customers can check Emeralda description here FractalizeR’s WebSite and here: Smart-card-based protection services offer for developers

A brief summary of new features in 1.5:

Multiple card types supported:

• SCP01 and SCP02 card protocols supported and that covers most of currently available card types.
• Updated Emeralda client-server protocol allows to support different card types and different applets for each card type

Security improved:
• Per-card unique access keys supported
• Master key protection added to server and to card programmer
• Same-keys secure session bug patched

New smartcard communication libraries:
• Transparent T=0 (e-gate and similar cards) and T=1 (some new cards) communication protocols support
• Refactored design allows easy library extensibility

Refactored client-server protocol support
• New action-based client interface and new status messages to allow/deny client actions
• New action-based internal server architecture
• Card registration infrastructure

Multithreaded card programmer (new part of Emeralda project now based on native components)
• Based on Emeralda components and smartcard communication library
• Allows to program several cards at once (using USB hub for example)

Other:
• Database schema simplified (changed completely) to provide an ease of DB administration using standard tools like PHPMyAdmin
• Developer mode for server and programmer introduced to distinguish between production and development cards

Upgrade price for old customers is $900
New license price is $2500 as before.
Licenses are sold on per-team basis. ]]> facebook http://www.gsm4bd.com/showthread.php?89257-Emeralda-Smart-Card-Upgrade-Client-Server-Suite-1.5-from-FractalizeR-available http://www.gsm4bd.com/showthread.php?89256-Z3X-BOX-LG-Update.-Many-LG-Cyon-added&goto=newpost Thu, 09 Sep 2010 14:30:34 GMT *LG Qualcomm Tool 1.9.7 Update.World first* *Added: - GW620 support (nv read/write/repair) - GW620f support (nv read/write/repair) - GW620g... LG Qualcomm Tool 1.9.7 Update.World first

Added:
- GW620 support (nv read/write/repair)
- GW620f support (nv read/write/repair)
- GW620g support (nv read/write/repair)
- GW620go support (nv read/write/repair)
- GW620r support (nv read/write/repair)
- KU1700 support (direct unlock ver:KU170906, KU170910, nv read/write/repair)
- KU4000 support (direct unlock ver:KU400911, nv read/write/repair) - World First!
- KU6000 support (nv read/write/repair)
- MU515 support (direct unlock, imei repair, flashing, nv read/write/repair, factory reset)
- SH170 support (nv read/write/repair)
- SH240 support (nv read/write/repair)
- SH650 support (nv read/write/repair)
Fixed:
СT810, CT815, GT810 unlock fix
KH1200 send loader to phone fix

LG Qualcomm Tool 1.9.7. First in the world. Many phones added ]]> facebook http://www.gsm4bd.com/showthread.php?89256-Z3X-BOX-LG-Update.-Many-LG-Cyon-added http://www.gsm4bd.com/showthread.php?89254-DBSS-v3.28!-Added-support-for-J10-amp-J20-A2-(DB3350)-platform&goto=newpost Thu, 09 Sep 2010 14:27:35 GMT Dear Users, We are pleased to introduce a new version of *DBSS v3.28 (http://dreambox.hk/downloads.php)* With this release we present the... Dear Users,
We are pleased to introduce a new version of DBSS v3.28

With this release we present the following options:

1. Added support for the following A2 (DB3350) platform based models:
   
   J series: J10 (Elm), J20 (Hazel)
   
   Following options released for specified above models:
   • Multiflash Main Firmware/File System using DCU-60 cable
   • Read/write GDFS + TA
   • Phone customization
   • Read phone info
   • Reset User Lock
   • Reset Call Timer
2. Boot-Loader.com flash file database fully reorganized and updated.

DreamBox - get more with it. ]]> facebook http://www.gsm4bd.com/showthread.php?89254-DBSS-v3.28!-Added-support-for-J10-amp-J20-A2-(DB3350)-platform http://www.gsm4bd.com/showthread.php?89253-Z3X-BOX-LG-Update.-LG-Qualcomm-Language-Editor-v1.0.3&goto=newpost Thu, 09 Sep 2010 14:26:22 GMT *LG Qualcomm Language Editor v1.0.3 Image: http://z3x-team.com/content/uploads/GU280i.jpg New phone added to supported for edit lp: -... LG Qualcomm Language Editor v1.0.3



New phone added to supported for edit lp:
- GU280
- GU280f
- GU282
- GU285
- GU285f
- GU285g
- KF390
- KF390Q

http://forum.gsmhosting.com/vbb/f453/lg-qualcomm-language-editor-v1-0-3-new-models-added-1091242/#post6310426 ]]> facebook http://www.gsm4bd.com/showthread.php?89253-Z3X-BOX-LG-Update.-LG-Qualcomm-Language-Editor-v1.0.3 http://www.gsm4bd.com/showthread.php?89144-LG-Qualcomm-Tool-1.9.7.-First-in-the-world.-Many-phones-added&goto=newpost Thu, 09 Sep 2010 10:41:03 GMT *LG Qualcomm Tool 1.9.7 Update.World first* *Added: - GW620 support (nv read/write/repair) - GW620f support (nv read/write/repair) -... LG Qualcomm Tool 1.9.7 Update.World first

Added:
- GW620 support (nv read/write/repair)
- GW620f support (nv read/write/repair)
- GW620g support (nv read/write/repair)
- GW620go support (nv read/write/repair)
- GW620r support (nv read/write/repair)
- KU1700 support (direct unlock ver:KU170906, KU170910, nv read/write/repair)
- KU4000 support (direct unlock ver:KU400911, nv read/write/repair) - World First!
- KU6000 support (nv read/write/repair)
- MU515 support (direct unlock, imei repair, flashing, nv read/write/repair, factory reset)
- SH170 support (nv read/write/repair)
- SH240 support (nv read/write/repair)
- SH650 support (nv read/write/repair)
Fixed:
СT810, CT815, GT810 unlock fix
KH1200 send loader to phone fix ]]> rumenshom http://www.gsm4bd.com/showthread.php?89144-LG-Qualcomm-Tool-1.9.7.-First-in-the-world.-Many-phones-added http://www.gsm4bd.com/showthread.php?89083-SPI-support-over-Martech-CLIP-08.09.2010&goto=newpost Thu, 09 Sep 2010 05:10:02 GMT SPI support over Martech CLIP !

Finally it's done, from now you can have SPI read/write/verify over you CLIP device

How it works ? It's simply, you are making simply wires and the rest process is executed on
CLIP, totally without PC. Both modes are possible: with desoldered spi memory, or in circuit (in board programming).

You must have RCD or RCD PRO activated to run this tool.
Download it: http://martech.pl/download/CLIP/SPI/SPI_Tool_10.prg

User manual (diagrams, connections, photos):
http://martech.pl/download/CLIP/SPI/SPI_MANUAL_EN.pdf





You can also use public support, here you can find datasheets for memories too:
Martech Team Public Support (CLIP folder)

Next protocols are coming soon
Best regards

Martech Team

MARTECH Team - Official WebSite
martech.pl :: Forum index
Martech Team shop ]]> rumenshom http://www.gsm4bd.com/showthread.php?89083-SPI-support-over-Martech-CLIP-08.09.2010 http://www.gsm4bd.com/showthread.php?88644-8-Sep-2010-Micro-Box-AIO-V1.0.5.6-GM310-GW525-(LG)-Sams-S401l-amp-Bug-repair&goto=newpost Wed, 08 Sep 2010 13:01:51 GMT *8 September 2010 Micro-Box AIO V1.0.5.6 LG and SAMSUNG CODE READER UPDATE (beta):* - Update for LG with GM310, GW525 and SAMSUNG with S401I!... 8 September 2010 Micro-Box AIO V1.0.5.6

LG and SAMSUNG CODE READER UPDATE (beta):

- Update for LG with GM310, GW525 and SAMSUNG with S401I!

- LG GT540 port detection error and LG BL40 error repaired!
- CABLE INFO and UNLOCK PROCEDURE corrected for some models!

BR
Julvir

MICRO-BOX v2.0



ORIGINAL THREAD :

8 Sep 2010 Micro-Box AIO V1.0.5.6 : GM310 GW525 (LG) + Sams S401l & Bug repair ]]> facebook http://www.gsm4bd.com/showthread.php?88644-8-Sep-2010-Micro-Box-AIO-V1.0.5.6-GM310-GW525-(LG)-Sams-S401l-amp-Bug-repair http://www.gsm4bd.com/showthread.php?88641-Infinity-Box-Fly-Intex-Nexian-Spice-Verykool-models-updated&goto=newpost Wed, 08 Sep 2010 13:00:17 GMT "MModule" v3.58 released:
.Fly-MC160 model supported
.Intex-IN4495 model supported
.Nexian-G381i model under test
.Spice-M6262 model supported
.Verykool-i280 model supported
.firmware database updated


Infinity-Box 5 (five) years non-stop free updates and support: Infinity-Box - News
- Infinity-Box Variants & Packages
- BB5 Easy Service Tool [BEST] Dongle
- CDMA-Tool Dongle (fast and easy unlock)
- PinFinder: automatic pinout detection device
- Language & Resource Editor for MT62xx based models
- Extract phonebook (and other content) from alive and dead phone
- Follow us on Twitter ]]> facebook http://www.gsm4bd.com/showthread.php?88641-Infinity-Box-Fly-Intex-Nexian-Spice-Verykool-models-updated http://www.gsm4bd.com/showthread.php?88490-RCD2-Tools-0.0.3.9-Honda-update-started&goto=newpost Wed, 08 Sep 2010 06:08:29 GMT *RCD2 Tools 0.0.3.9 - Honda update started* *Latest Update:* *- Alpine, 2JL0 RG723RB ( Honda ) - Alpine, 2TCA MF624AA ( Honda ) -... RCD2 Tools 0.0.3.9 - Honda update started

Latest Update:

- Alpine, 2JL0 RG723RB ( Honda )
- Alpine, 2TCA MF624AA ( Honda )
- Alpine, 2TCB MF624A ( Honda )
- Alpine, 2TCC MF624AB ( Honda )
- Alpine, 2TTC ( Honda )
- Alpine, 2TW0 MF823A0 ( Honda )
- Alpine, 2TW2 MF823A0 ( Honda )
- AUZ2Z2, Grundig, Chorus ( Audi )
- AUZ2Z3, Grundig, Concert II ( Audi )
- 39100-S0X-C020, Matsu****a, CQ-JH8161Z ( Honda )
- FD9902, Blaupunkt, H0 RDS Twingo ( Renault )
- BP8124, Blaupunkt, H0 RDS ( Renault )
- SEZ1Z3G, Blaupunkt, SE 357 MP3 LHD ( Seat )

Run you rcd2.exe to get automatic update
(or download from Martech Team Public Support)

Best regards!

Martech Team
MARTECH Team - Official WebSite
Martech Team shop
martech.pl :: Forum index ]]> MT TECHNOLOGY http://www.gsm4bd.com/showthread.php?88490-RCD2-Tools-0.0.3.9-Honda-update-started http://www.gsm4bd.com/showthread.php?88480-ORT-JTAG-Huawei-E220-JTAG-Repair-Dead-Boot-08-Sep-2010&goto=newpost Wed, 08 Sep 2010 05:39:41 GMT ORT - JTAG UPDATE
[08 SEP 2010]

Description :
Huawei E220 Dead Boot Repair


Tools : ORT Tool [Latest Version Recommended]
Repair : Huawei_E220.ort
VREF : 2.6V

Operation Manual :

1. Make Proper Connections"E220_JTAG_Pinouts"
2. Connect Modem to USB
3. Click SCAN
4. Select Repair File"Huawei_E220.ort"
5. Click Repair
6. Done.

Tip : Click SCAN right after inserting modem to usb port

Released Stuffs :

• Huawei_E220.ort (Smart Repair File)
• Huawei E220 JTAG Pinouts
• Huawei E220 Service Manual

ORT is a Real JTAGger's choice


www.ORT-JTAG.com ]]> rumenshom http://www.gsm4bd.com/showthread.php?88480-ORT-JTAG-Huawei-E220-JTAG-Repair-Dead-Boot-08-Sep-2010 http://www.gsm4bd.com/showthread.php?88407-happy-eid-fitr-to-all-muslims-from-GPGIndustries&goto=newpost Wed, 08 Sep 2010 04:26:35 GMT Image: http://www.gpgindustries.com/banners/Eid/08-28-Happy-Eid-from-GPGIndustries-png.png ]]> GPGIndustries http://www.gsm4bd.com/showthread.php?88407-happy-eid-fitr-to-all-muslims-from-GPGIndustries http://www.gsm4bd.com/showthread.php?88132-Infinity-Box-BB5-Easy-Service-Tool-BEST-v1.08-released&goto=newpost Tue, 07 Sep 2010 17:41:08 GMT BB5 Easy Service Tool [BEST] v1.08 uploaded on support area:

- USB flashing improoved

* Updated flashloaders
* Improoved RAPUYAMA/Rap3gV4/Broadcomm flashing
* Improoved N96 flashing
* Improoved S60 RAPIDO flashing
* Improoved old S40 boot/flashing
* Improoved S40 dead mode cntent writing especialy for old models
* Improoved AfterFlash operations
* Added Certificate (NPC/CCC/HWC) backup in USB normal/Dead flashing
* Some cosmetic changes and bugfixes

- UFS support added

* All service operations are supported
* All user data operations are supported

- RPL read added for new BB5

* Also can be used for dead-to-test mode without need select flash-files

- User Data operations improoved

* S60 Symbian 9.3/9.4 phonebook write activated for some special cases
* DCT4+ gallery/SMS read improoved

- Service operations improoved

* E-series code reading improoved
* FunLabel improoved
* SelfTest improoved (especialy for new phones)
* Improoved and rebuilded connection for DCT4+/Infineon/WD2 phones

BB5 Easy Service Tool (BEST) Nokia Dongle - GSM-Forum




Infinity-Box 5 (five) years non-stop free updates and support: Infinity-Box - News
- Infinity-Box Variants & Packages
- BB5 Easy Service Tool [BEST] Dongle
- CDMA-Tool Dongle (fast and easy unlock)
- PinFinder: automatic pinout detection device
- Language & Resource Editor for MT62xx based models
- Extract phonebook (and other content) from alive and dead phone
- Follow us on Twitter ]]> milton.bdc http://www.gsm4bd.com/showthread.php?88132-Infinity-Box-BB5-Easy-Service-Tool-BEST-v1.08-released http://www.gsm4bd.com/showthread.php?88054-Martech-Service-Manager-MSM-Update-07.09.2010&goto=newpost Tue, 07 Sep 2010 16:06:32 GMT *Update 07.09.2010* - Automatic email notification for client about the order status change. - Access password reset / reminder form. - On the... Update 07.09.2010

- Automatic email notification for client about the order status change.
- Access password reset / reminder form.
- On the order list -added highlighting of orders that are already out of time.
- In the order history added an information about customer login ./orderstatus/ with IP address.

We are looking for people who can translate MSM into other languages.
Anyone who help in the translation will get free MSM activation.
See how simple is the translation process...



Read more... ]]> facebook http://www.gsm4bd.com/showthread.php?88054-Martech-Service-Manager-MSM-Update-07.09.2010 http://www.gsm4bd.com/showthread.php?87929-SMTi-JTAG-JRT-Ver-19.92-Released-!-(07.09.2010)&goto=newpost Tue, 07 Sep 2010 13:05:56 GMT SMTi Ver 19.92 Released :

- MSM6280 & MSM72XX write boot bug fixed
- Samsung I900 new boot file added to JRT Support Area

Support Section:
SMTi Support Sections - GSM-Forum

SMTi JTAG JRT Supported CPU list :

• MSM6245
• MSM6246
• MSM6250
• MSM6250A
• MSM6260
• MSM6275
• MSM6280
• MSM6281
• MSM6290
• MSM7XXX
• MSM7200
• MSM7200A
• MSM7201
• MSM7201A
• MSM72XX
• MSM7225
• MSM7227
• MSM75XX
• MSM7500
• MSM7500A
• MSM7501
• MSM7600
• QSD8250
• QSD8650

Best Regards SMTeam ]]> facebook http://www.gsm4bd.com/showthread.php?87929-SMTi-JTAG-JRT-Ver-19.92-Released-!-(07.09.2010)